Jakarta, SolusiProperti.com-Along with the development of technology, television model is increasingly diverse. Two types of the most recent television is an LCD TV and LED TV, is also known as flat-screen televisions. In order to function optimally, the television should be installed in a way to hang on the wall using brackets.
Bracket is a tool that serves to hold the position of a television hanging on the wall. These devices typically have participated included when we buy a product or TV LED LCD TV. By using the bracket, we could be easier to attach the television on the wall.
Please note, the original bracket on the market price ranges between Rp 150-500 thousand. It depends on the brand, size, design and material of the bracket. But did you know that we can create their own bracket with a capital of less than Rp 5 thousand.
Tools and Materials:
ObengPaluPensilWaterpass2 hanger fruit plate fruit figura2 concrete nails; adjust its size to dinding2 strength bolts and rings; adjust its size with the mounting holes in LCD TV / LEDCara made:
Prepare all ingredients above in full. Use figura plate thick enough for this plate will serve as load-bearing televisions. Adjust the size of concrete nails were used to rate the strength of the wall. Similarly, the size of the bolt and the ring must be adapted to the dimensions of the mounting holes behind the LCD TV / LED.Mulailah by adjusting the shape of the plate that was used to hanger figura. The trick is to bend the plate such that its shape fits the contours of the rear surface of the television from the mount hole until the top side. Fasten the plate using bolts figura right on the pit wall mounted. After that, the key position by placing a ring bolt pasangannya.Kini time to determine the location of the installation of LCD TV / LED on the walls of the room. First, you can measure the distance between the plate figura which has been mounted on the television. Do not forget to record the measurement results let me not forget. Then point the television on the wall exactly where the TV will be installed. Mark the position using pensil.Proses next is to drive a nail into the wall as a place to hang figura plate that secures the TV. Before this process begins, it is advisable to ensure that the second mounting point had been completely flattened and balanced. Wear waterpass to check the height of each of these pins. Only then you can embed a nail into a wall using a hammer / nail martil.Setelah successfully mounted on the wall, now lives on the television to pair these spikes. You just hang figura plate that secures the TV to spikes earlier as when you did figura photos and paintings. Do not forget to check in advance whether the television is installed correctly and fairly simple aman.Walaupun in the process, this guide has at least two disadvantages. The first drawback is the position of the television will be static alias can not set-set gaze. And the lack of both a cable that complements the TV will look messy. So this guide we designation for those who want to downsize temporarily while collecting the budget to buy a TV bracket. (YN)
solusiproperti.com
0 Response to "Simple Ways to Make TV Bracket LCD / LED At Home"
Post a Comment